Digital control desk system in new DSP-technology for intercom servers GE 700 and GE 200, modular construction for up to 504 freely programmable LED-buttons. The uniform user interface provides a clear overview of conditions and situations for the operating personnel even in large systems and visualises them on the function buttons. Available as desk version or build-in version (mounting plate not included) for integration in system consoles in control rooms.
Technical Data: Illuminated full graphic display (8 lines to 14 characters each); power supply via external mains-adapter 12 – 24 VAC/10 VA or 15 – 35 VDC/10 W (mains-adapter included in extent of supply of EM 805); built-in amplifier with 1.5 W; built-in loudspeaker with special membrane type for optimal sound quality; two inputs for floating contacts; two relay outputs 30 V/3 A; direct connection of headphone-headset or handset, key-switch, COMWIN or touch-screen via RS 232.
Desk housing (without modules) for insertion of one EM 806 (intercom module), one EM 805 (multifunctional module) and one EM 802 (LED-button module). Optionally supplied with noise-cancelling gooseneck microphone (EE 880A) or without microphone (EE 880C – the microphone of the intercom module EM 806 is used). With the supplied slanting bracket the legibility of the display can be improved ...
Expansion housings (without modules) for insertion of three additional modules (LED-button module EM 802 or dummy module EM 800). Slanting bracket included in extent of supply. ...
For build-in control desks no desk housing is required. The following modules are required: one EM 806 intercom module, one EM 805 multifunctional module (incl. power supply), at least one EM 802 LED-button module. A gooseneck microphone can be ordered separately (MIC 800). ...
Remote in / output module for management of inputs and outputs far from the central: 8 inputs (with 5 steps) and 8 outputs (4 make and 4 switch over). The connection to the in / output module is realised via a 2-wire line with up to 3,000 m length (depending on cable type and power supply). Mounting is possible in a 19" rack on a DIN rail or with the supplied rail for wall mounting. LED’s for status indication for all inputs and outputs. Line-monitoring from G7-8E8A to central.
Technical Data: 8 inputs for floating contacts; 8 relay outputs 30 V/3 A (4 make and 4 switch over); power supply via central (optional: power supply for greater line length).
Due to its modular construction the control desk system can be optimally configured to customer specifications. For each control desk an intercom module EM 806, a multifunctional module EM 805 and at least one LED-button module EM 802 are required. For expansion further LED-button modules EM 802, dummy modules EM 800, key-switches EM 807 and handsets EM 808 are available. The required cables for connection between the modules are included in the extent of supply.
Lit keypad module with 18 freely programmable LED buttons. Maximum expansion: 28 LED-button modules with 18 buttons each = a maximum of 504 function buttons. ...
Multifunctional module with large, illuminated Dot-Matrix display, 6 function buttons for operation, connections for headphones / headset or handset, key switch, two inputs and two outputs and one RS 232 interface (for direct connection of COMWIN or a touch screen). Mains-adapter 100 – 240 V AC, 50 – 60 HZ, 400 mA included. Country-specific power supply ...
Digital 2-wire intercom module with new DSP-technology and foil keypad “0” – “9”, “T”, “X”, bright conversation lamp, electret microphone and built-in loudspeaker. ...
Key switch, as supplement for i.e. switching off the control desk or putting into night operation (installed at the rear side of the desk housing instead of a cable insert). ...