Navigation Products > Packages & Add On´s > LiftLine Autodialer  
LiftLine Autodialer
Liftline by Commend®
LiftLine by Commend® is a new, compact emergency call system (Autodialler), which has especially been developed according to the requirements of the norm EN81-28. Built on the know-how of high-end intercom servers a novel and very compact system has been created, that is exactly tailored to the legal regulations for lift emergency calls valid in Europe.

In addition to individual calm down messages that are heard by the calling person, message texts for lift location and lift number can be recorded. The five emergency numbers of the rescue organization as well as the call number for the prescribed 3-day-test call are also freely programmable. Via an optional serial interface it is possible to adapt system data, as well as carry out software updates. Needless to say LiftLine is compatible with the Commend Test Call Centre (TCCS – Test Call Control Service).

LiftLine is a modular concept: beside the complete pre-configured basic package for facilities with a single lift there are expansion modules for one or two additional lifts available. Due to the intelligent LiftLine central only a single telephone connection is required for the entire system.

 

top

Pre-configured Packages
A range of intercom station types and kits are available to suit New Lifts, Existing COPs, Refurbishments and Upgrades. Installation is extremely simple with only 4 trailing cable wires being needed. LiftLine is delivered pre-configured with only the Rescue/Test Centre number and Lift Location message to be programmed. This can be carried out either on-site or remotely via telephone or GSM.

 


LL-BA-11

LiftLine Basic package for lift shafts smaller than 30 m, consisting of one central, cabin roof and lift shaft station (with one button each) as well as build-in station for the cabin. ...

Details

LL-BA-12

Same as LL-BA-11, but with station module for the cabin (instead of build-in station). ...

Details

LL-BA-13

Same as LL-BA-11, but with intercom module kit for the cabin (instead of build-in station). ...

Details

LL-BA-11M

LiftLine Basic package for lift shafts greater than 30 m, consisting of one central, cabin roof and lift shaft station (with one button each), motor room station as well as build-in station for the cabin. ...

Details

LL-BA-12M

Same as LL-BA-11M, but with station module for the cabin (instead of build-in station). ...

Details

LL-BA-13M

Same as LL-BA-11M, but with intercom module kit for the cabin (instead of build-in station). ...

Details

LL-BA-21

LiftLine Basic package for lift shafts smaller than 30 m, consisting of one central, cabin roof and lift shaft station (with two buttons each) as well as build-in station for the cabin, prepared for Intercom function Maintenance ...

Details

LL-BA-22

Same as LL-BA-21, but with station module for the cabin (instead of build-in station). ...

Details

LL-BA-23

Same as LL-BA-21, but with intercom module kit for the cabin (instead of build-in station). ...

Details

LL-MA1

LiftLine Maintenance package for lift shafts greater than 30 m, consisting of one central, cabin roof and lift shaft station as well as motor room station (with two buttons each) and build-in station for the cabin, including Intercom function Maintenance ...

Details

LL-MA2

Same as LL-MA1, but with station module for the cabin (instead of build-in station). ...

Details

LL-MA3

Same as LL-MA1, but with intercom module kit for the cabin (instead of build-in station). ...

Details

LL-SBA1

LiftLine Expansion package for one additional lift, consisting of cabin roof and lift shaft station (with one button each) as well as build-in station for the cabin, for expansion of the basic packages LL-BA-11, LL-BA-11M, LL-BA-12, LL-BA-12M, LL-BA-13 or ...

Details

LL-SBA2

Same as LL-SBA1, but with station module for the cabin (instead of build-in station). ...

Details

LL-SBA3

Same as LL-SBA1, but with intercom module kit for the cabin (instead of build-in station). ...

Details

LL-SMA1

LiftLine Expansion package for one additional lift, consisting of cabin roof and lift shaft station (with two buttons each) as well as build-in station for the cabin, including Intercom function Maintenance Communication, for expansion of the basic packages LL-BA-21, LL-BA-22, LL-BA-23, LL-MA1, LL-MA2 or ...

Details

LL-SMA2

Same as LL-SMA1, but with station module for the cabin (instead of build-in station). ...

Details

LL-SMA3

Same as LL-SMA1, but with intercom module kit for the cabin (instead of build-in station). ...

Details

 

top

Accessories
 

 


LL_USV

Uninterruptible power supply for LiftLine by Commend® centrals, assures autonomous operation for a minimum of one hour, as required by the norm. ...

Details

LL-RS232

Plug in card for LiftLine by Commend® centrals for individual programming on site as well as download of software updates. ...

Details
Related Pages
Contact JNT Systems
Last Updated On Monday, April 23, 2007 07:51:41 AM
Page Visits: 297